AMEC GROUP Complete Auto Animal Feed Pellet Mill Plant For Making Poultry Feed
This automatic chicken feed pellet production line can be used to make feed pellets for all ages chicken and other poultry. It is a good choice for the professional feed pellet factory.
Application: for making feed pellets for chicken, cattle, geese, pig, duck, sheep, rabbit, and other animals, livestock and poultry feed.
Optional capacity for auto complete feed plant: 1-30t/h
Main Process of Auto Animal Feed Pellet Mill Plant:
1. Crushing Section
When the thickness of the raw material is >5 mm, the raw materials must be used for size reduction before the feedstock is sent to the hammer mill (crusher) to reach a diameter of less than 3 mm.
2. Mixing Section
Two open doors structure, discharge rapidly, no leakage, no residue. Multiform liquid adding system and can be matched with compressed air jetting system Suitable for mixing premix, poultry feed, aquatic feed, additives and chemical and medicine industries, etc
3. Pelletizing Section
Acting as the heart part of the whole processing line, ring die pellet mill through adjusting the rotational speed of screw feeder axis to obtain the suitable flow of material, through the enforced feeder, enter the pressing room to pelletize finally.
4. Cooling Section
After the pelletizing process, the temperature of the feed pellet is about 60-80 degrees Celsius, with a moisture content of about 15%. A Cooler must then be used to reduce the moisture content of the wood pellets to about 3-4%, thereby making the feed pellets easier to store.
5. Screening Section
It is applicable for screening and classifying of mash or pellet feed. It is also can be used for cleaning of raw materials and classifyingof semi finished products after second grinding.
by large and medium feed mills.
6. Packing Section
After cooling and screening, the feed pellet must be protected from moisture and other environmental conditions. For this there is the packing process, which is effectively handled by our high efficiency Packing Machine.
Final Feed Pellet Size:
1. For pig: usually ø3.5-6.5mm.
2. For cattle: usually ø4.5-8mm.
3. For chicken: usually ø3.2mm.
4. For fish: usuallyø2.0, ø2.5, ø3.0mm.
5. For shrimps: usually ø1.0-ø3.5mm.
