30-1000kg/H Extruder For Pet Dog Floating Fish Feed Extrusion Process
Introduction for Extruder for Pet Dog Floating Fish Feed Extrusion Process:
This extruder for pet dog floating fish feed extrusion process has built-in screw and lengthened screw sleeve, material rotary cutting time is long, temperature can be adjusted, output torque can be adjusted, so that the product has high expansion degree and smooth surface.
The extruder for pet dog floating fish feed extrusion process can make different feed pellets such as: floating aquatic feed pellets, sinking fish feed pellets, shrimp and crab feed pellets, pet feed pellets etc.
Main Parameters of Extruder for Pet Dog Floating Fish Feed Extrusion Process:
| Model No. | Voltage | Capacity (t/h) | Power
(kw) | Feeding power
kw | Screw Dia.
(mm) | Cutting Power
(kw) | weight
(kg) |
| DGP40-C | 380V/50Hz | 0.03-0.04 | 5.5 | 0.4 | φ40 | 0.4 | 260 |
| DGP50-C | 380V/50Hz | 0.06-0.08 | 11 | 0.4 | φ50 | 0.4 | 350 |
| DGP60-B | 380V/50Hz | 0.12-0.15 | 15 | 0.4 | φ60 | 0.4 | 355 |
| DGP70-B | 380V/50Hz | 0.18-0.25 | 18.5 | 0.4 | φ70 | 0.4 | 580 |
| DGP80-B | 380V/50Hz | 0.3-0.35 | 22-27 | 0.4 | φ80 | 1.1 | 700 |
| DGP90-B | 380V/50Hz | 0.4-0.45 | 32 | 0.4 | φ90 | 1.5 | 950 |
| DGP100-B | 380V/50Hz | 0.5 | 37 | 0.75 | | 1.5 | |
| DGP120-B | 380V/50Hz | 0.5-0.7 | 55 | 0.4 | φ120 | 2.2 | 1700 |
| DGP135-B | 380V/50Hz | 0.8-1.0 | 75 | 0.4 | φ133 | 2.2 | 1900 |
| DGP160-B | 380V/50Hz | 1.2-1.5 | 90 | 1.5 | φ155 | 2.2 | 3600 |
| DGP200-B | 380V/50Hz | 1.8-2.0 | 132 | 2.2 | φ195 | 3 | 4300 |
Structure&Features of Extruder for Pet Dog Floating Fish Feed Extrusion Process:
1. The extruder for pet dog floating fish feed extrusion process has international advanced cutting structure and adopts soft knife laminating form to realize stepless speed change. The pet floating fish feed dog food pellet making machine can cut the discharged material into required length products at will, and it is not easy to produce burr.
2.The extruder for pet dog floating fish feed extrusion process’s design is novel, unique, simple in structure, easy to install, easy to disassemble and easy to operate.
3.The screw sleeve and screw are made of special wear-resistant and high-temperature alloy steel and heat-treated, which have the advantages of wear resistance and long service life.
4. Unique pressure increasing die device is set inside to ensure feed output and quality, and electric heating device is equipped to improve feed expansion rate.
5. The main motor of this The extruder for pet dog floating fish feed extrusion process adopts high-quality Y Series two-phase and three-phase motors to ensure strong power.
6. Speed control feeding device, more convenient to operate, feed evenly, prevent suffocation.
7. It is easy to replace the discharge template, and the feed with different pore size only needs to be replaced.
Application of Extruder for Pet Dog Floating Fish Feed Extrusion Process:
